Ap.Setup l 192.168.10.1 l MANUALS

Dodocool DC39 Extender Setup

 Dodocool DC39 Extender Setup

For wireless networks, Dodocool is a network extender. It's obvious what a Wi-Fi network extension is and why we need one. Wi-Fi extenders enable us to use our smartphones in locations where the network isn't accessible, such as our homes or offices.

The home routers on offer aren't just for providing a strong and dependable wireless signal in the home. This will be made simpler with devices like the Dodocool DC39 Extender Setup wall-mounted wireless range extender setup. It will only be accessible to the farthest reaches of the buildings.

It has a wireless transmission rate of 300mbps over 2.4 GHz wireless N(802.11n) and can transmit data up to 100 meters. Due to the dual integrated antennas, wireless performance and reliability are enhanced. The Dodocool dc39 extender rig can be configured in a variety of ways.

Dodocool DC39 Extender Setup  with ap.setup

• The DC39 extender is ready to use when it is connected directly to the electric green light terminal.

• To link to your Wireless-N network, tap WiFi on your phone or tablet. The Dodocool Extender network is known by this name by default.

• The chrome-form IP address is 192.168.10.1, or simply type ap.setup into the address bar.

• On the DC39 extender Setup page, use the username and password "admin."

• Scanning begins with the network list shown on the screen. Select the key wi-fi network from the list and enter the password.

• The configuration will be enforced for about 50 seconds before being reset. You're going to make an internet connection. The Extender can also act as a router for your home network.

Dodocool DC39 Extender Setup via  WPS method

• The extender must be wired to an electrical outlet.

• They must be held in the same location as your router. The Dodocool dc39 extender is ready to use when the green light blinks.

• Check to see whether your dc39 extender is in the correct mode, such as router, signal repeater, or range extender mode.

• Within 2 minutes, click the WPS button on your router and then the WPS button on the New Range Extender Setup. A Dodocool WPS button is located on the side of the extender.

• On the extender, both the WPS indicator and the router are blinking. The dc39's Wi-Fi light will also remain solid until it is activated.

• You may also use this extension to link your device to a location without internet access.

• It's possible that setups are a pain in the ass.

• Setup of the Dodocool Wifi Repeater:

There is a snag, and it is a big one. There's a catch, and it's a big one. There's a catch, and it's a big one. The good price and features come with a catch, and it's a big one. The manual will teach you how to use the DC39's repeater feature in a number of ways to get a Wi-Fi signal. If the DC39 can detect a signal when it is opened, configuring it through an Internet browser is easy. It's not a jumble, but it should be the most straightforward choice among the options in the manual.

The simplest way to make an opening is to click the extender reset button and then the router's WPS or repeater button. It won't take long for the extender to pick it up. This can also be a pain if someone's router is in an inconvenient place. In 2017, it should be a no-brainer to be able to customise the extender using a smartphone.

Wifi Extender Setup is a service provider that is self-contained. Unless otherwise noted, the use of trademarks, logos, products, or services is merely descriptive, and Wifi Extender Setup has no association with any of the companies. The services we offer may also be available on the websites of the brand owners.