Wavlink AC1200 Setup

   

 

 Wavlink AC1200 Setup: Progressively improve your wireless network with the aid of a dual band wireless range extender from Wavlink Extender Setup. This enables you to enjoy a trouble-free location with a extremely compact and versatile build. 

In addition, its elegant style helps it to seamlessly fit in with your current home or office decor. 

 Easily expand the coverage of the current wireless network everywhere with Wavlink ac1200 setup wireless range extender. Four antennas are mounted in a special and proprietary omnidirectional setup to boost and make the current network more secure. 

 The high- performance antennas let you attach all your devices from every corner of your home. In addition, Wavlink AC1200  Extender setup attaches to your router wirelessly. So it detects the router 

signals immediately and begins enhancing it.

 Step for Wavlink ac1200 setup

·         Next, mount your Wavlink wireless range extensor to a reliable power source. To do this, the power adapter is connected to a power outlet near your router. 

·         Make sure the wires are coated correctly. Make sure there is a bright blue light showing 

that the extender was successfully powered on.wavlink ac1200 setup 

·         Now you must connect the extender to your router. To do so, you need to concurrently push both the WPS button on your router and your extender. Please note that you do so with in two minutes or the devices will not connect. 

·         Make sure the signal Lead turns to solid blue once more. 

·        This means both systems were linked successfully. Now you can take your Wavlink ac1200 setup to the next level. 

·        If all devices are successfully linked, the extender can nstantly detect your wireless router 's signal. The extender will then boost the network once it has been found.In addition,both the extended and standard networks would use the same SSID as well as the same password. So just connect to your current password and you're okay to go. AP.Setup

 

 

Installation guide for the Wavlink extender Ac1200 setup via ap.setup

Wavlink extenders are the best to increase the speed of the main wifi router and eliminate the dead areas which lack wifi signals. Wavlink extender setup provides the range of 750 sq.ft., so, let’s begin. 

Steps to configure wavlink ac1200 extender setup:

• First of all, the extender has to be switched on and make it accessible

• Connect your Ap.setup to a reliable power supply by attaching the adapter to the electrical socket. After that, keep a watch on your extender's LED to make sure it's stable.

• Now, you have to click a side button of your phone. Switch it to the repeater mode until you click it.

• Once again, keep an eye on the near LED of wavlink extender setup

• and check that the light is steady.

• Then, you have to locate your router next to the wavlink ac1200 extender setup. Making sure all machines are not too far apart nor too close to each other.

•  Maintain a decent gap between the two devices for the maximum coverage area.

• After that, get your computer or mobile and access your wireless manager. You will enter a network with the name of the wireless-N network.

• When you have successfully signed in, open a window and navigate to the URL bar. Enter the ap.setup website in the URL bar. When done, tap the enter key on your keyboard to visit the site.

• When you're on the website, you will be prompted to enter your login info. Only type "admin" in both the username and password sections of new extender setup and press login button.

• Finally, after you log in successfully, the website will navigate you via an easy setup request. Just obey the on-screen directions and finish the installation.

Configure your wavlink extender setup using ap.setup

 Ap.setup will help you to improve or enhance current wifi signals in dead spots and remove the areas. Victony WiFi Extender Setup allows you to play HD videos and movies and experience lag-free gaming comfortably and deliver the best performance. Below is the process to install the wavlink extender so you can avoid wasting your time.

Step by step instructions to Ap.setup:

1. Plug the Wavlink Extender for Ap.setup into a power socket nearby the router.

2. Switch on your Wavlink extender setup and stay till the LED is stable.

3. Select either of your WiFi enabled devices and connect to your Wavlink network. Go to the Wi-Fi network and connect to the network.

4. Open the browser of your preferences and enter the username and password  for wavlink http:/ap.setup in your browser. .Press the enter button

5. Please provide the login details of the Wavlink Extender in the required fields and press 'Login'

6. Choose from the ap.setup page and click on the new home Wifi network and enter the wifi network address.

7. You need to type the WAVLink Extender Network Wi-Fi name and password on the next tab.

8. Then press the  'Save' button to apply the settings.

9. AP extender setup via is successfully completed and then you will be able to enjoy fast internet service.

10. Still unable to install the  wavlink extender setup? Don't panic, our free support team helps you to easily install ap.setup and fix your problems in a few minutes.